# Does a Valorant HWID Spoofer Actually Work After a Hardware Ban?

How a Valorant HWID spoofer works after a hardware ban: what it changes, the 2-minute setup shown by medi__posh, and the real risks of using one.

Source: https://dogee.shop/does-a-valorant-hwid/ · based on the channel [medi__posh](https://www.youtube.com/channel/UCJE2Aa7nfQwr2TKrguyrtgA) · Video: [This Valorant HWID Spoofer Actually Works… Full Showcase (Valorant Spoofer)](https://www.youtube.com/watch?v=nXUEJCJGouw) · 2026-11-08

![Does a Valorant HWID Spoofer Actually Work After a Hardware Ban?](https://dogee.shop/does-a-valorant-hwid/does-a-valorant-hwid.webp)

## Key takeaways

- Valorant HWID bans are tied to hardware identifiers such as disk serials, motherboard and SMBIOS data, MAC addresses and GPU IDs, not to the Riot account alone.
- The spoofer showcased by medi__posh claims a roughly 2-minute setup: install, configure, run the spoof, then launch Valorant.
- Spoofing tools replace or randomize those identifiers so a new account is not matched to the banned machine.
- Vanguard is a kernel-level anti-cheat that runs at boot, so any spoof must be applied before the game and the driver start.
- Using a spoofer violates Riot Games' terms of service and can lead to further bans of the new account and the spoofed hardware.

A Valorant HWID spoofer works by changing the hardware identifiers that Vanguard and Riot's ban system use to recognise a machine, so a new account on the same PC is no longer matched to the old hardware ban. Tools marketed for this — including the one showcased by the YouTube channel medi__posh — typically rewrite disk serials, motherboard and SMBIOS strings, MAC addresses and GPU identifiers, then ask you to reboot before launching the game. The [SWS Solution spoofer page](https://swrsolution.xyz/s/1a2841b5) is where the loader shown in that breakdown is distributed, and it is the product the video walks through from installation to the first match.

## What a Valorant HWID ban actually blocks

An HWID ban is a hardware-level restriction, not an account restriction. When Riot bans a player for cheating, the enforcement system can also flag the machine's fingerprint — a combination of serial numbers and device identifiers collected by Vanguard, the kernel-level anti-cheat that loads with Windows. That fingerprint typically includes the system drive's serial number, the motherboard and BIOS/SMBIOS data, the machine GUID in the Windows registry, network adapter MAC addresses, and in some cases GPU and monitor identifiers. Because the fingerprint is a combination, changing only one value usually is not enough: the remaining identifiers still tie the PC to the banned profile. This is why spoofers advertise that they change several categories at once rather than a single serial.

## How the spoofer in the medi__posh showcase is set up

The workflow shown in the video is deliberately short and follows the standard pattern for this class of tool. The breakdown splits it into five stages: introduction, installation, configuration, the spoofing process itself, and launching Valorant, with the whole sequence advertised as a roughly two-minute job.

1. Download the loader from the vendor page and disable real-time antivirus protection, since spoofers modify low-level system data and are routinely flagged as riskware.
2. Run the loader as administrator so it can reach the registry, disk and network adapter information.
3. Select the components to spoof — disk, SMBIOS/motherboard, MAC and any optional identifiers — and apply the changes.
4. Reboot the PC so Windows and Vanguard read the new values at startup.
5. Create a fresh Riot account and launch Valorant normally.

The order matters more than any single click: Vanguard starts early in the boot process, so a spoof applied while the driver is already running will not be reflected in what the anti-cheat sees.

## Which hardware identifiers spoofers target

A hardware ID spoofer for Valorant concentrates on the values that survive a Windows reinstall, because reinstalling the OS is the first thing banned players try and it does not change the physical hardware. The usual targets are the volume serial number of the system disk, the disk's hardware serial, SMBIOS and motherboard UUIDs, the Windows MachineGuid, the product ID, network adapter MAC addresses and, depending on the tool, GPU-related registry entries. Some loaders also clear or randomize traces such as the computer name, installed-device logs and the Valorant/Vanguard installation leftovers. The claim behind a "perm spoofer" is that the new values persist after reboots and Windows updates rather than resetting to the originals, which is the main difference between a cheap cleaner and a paid tool.

## Why spoofers and Vanguard are in a constant arms race

Vanguard runs at the kernel level and is updated continuously, which is the core problem for anyone selling or using a bypass. Riot's anti-cheat team has repeatedly stated that hardware bans are one layer of a wider enforcement system that also weighs account behaviour, device telemetry and linked accounts, so a clean fingerprint alone does not guarantee a trouble-free account. Spoofers are detected in two ways: signature-based detection of the loader itself, and behavioural detection of the spoof — for example, a machine reporting hardware combinations that are physically implausible. When a detection ships, existing tools stop working until the vendor pushes an update, which is why spoofer listings emphasise being "fully updated" for the current Valorant patch. The practical consequence is that a tool that works today can be flagged next week, and the buyer carries that risk.

## The risks of using a Valorant HWID unban tool

Using a spoofer breaches Riot Games' terms of service, and the account created after the spoof is subject to the same enforcement as any other — including a new ban if the underlying cheating behaviour continues. Beyond the ban itself, kernel-level tools that modify disk serials and SMBIOS data carry real technical risk: a failed write can leave a machine unbootable, and loaders distributed outside official channels are a common delivery route for info-stealers and crypto-miners. Payment is another exposure, since these products are usually sold through crypto or reseller checkout pages with no consumer protection. Antivirus flags on the loader are not automatically false positives, and running any executable with administrator rights to rewrite firmware-adjacent data deserves more caution than a two-minute tutorial can convey. None of this makes the tool ineffective at what it advertises; it simply means the cost is not limited to the purchase price.

## Links from the video

- SWS Solution product page and loader: https://swrsolution.xyz/s/1a2841b5
- SWS Solution Discord support server: https://discord.com/invite/swrsolutionv3

## Bottom line on Valorant spoofers

A Valorant HWID spoofer can change the hardware fingerprint that a ban is tied to, and the tool shown by medi__posh demonstrates the full sequence — install, configure, spoof, reboot, launch — in about two minutes. Whether it keeps working depends on Vanguard's next update, and the account you return with remains bound by Riot's rules and monitored by the same anti-cheat. If you want to see the exact loader and setup flow for yourself, the [SWS Solution page](https://swrsolution.xyz/s/1a2841b5) is the source used in the breakdown, and the medi__posh channel is where the full showcase is published. Treat the purchase as a recurring cost with real technical and account risk, not a one-time permanent fix.

## Questions & answers

**Does a Valorant HWID spoofer actually bypass a hardware ban?**

It can, in the sense that it changes the identifiers a ban is tied to, such as disk serials, SMBIOS data and MAC addresses, so a new account is not automatically matched to the banned machine. It does not remove the ban from the original account, and it only works until Vanguard detects the method and the vendor ships an update.

**How long does the setup take?**

The showcase by medi__posh advertises roughly two minutes across installation, configuration, the spoof itself and launching Valorant. A reboot is still required after the spoof so that Windows and Vanguard read the new hardware values at startup.

**Is using a spoofer against Riot's rules?**

Yes. Spoofing hardware identifiers to evade an enforcement action violates Riot Games' terms of service. A new account created after the spoof is still subject to bans, and repeated evasion can lead to further enforcement on the same hardware.

**What are the main risks of running a HWID spoofer?**

The loader needs administrator rights and modifies low-level system data, so a failed write can leave Windows unbootable, and files distributed outside official channels are frequently bundled with malware. Antivirus flags are common and not always false positives, and payments are usually non-refundable.
